Stripping the wire seems to be a cake walk; however the job is easier said than done. There are certain tips and tricks to use the Cable Pulling & Cutting Tools effectively to accomplish the task.
Here are Some of The Methods that can do a Whirl of Good to the Users:
Do not Nick the Wire:
It is vital not to nick the wire or else you might end up breaking the product. One of the most important factors that have to be incorporated is to handle the wire with care so that it can be bent over to form the connection. In case, the cable is nicked, one should snip the location and proceed with the usage.
Inserting the wire into the proper slot is the next step because it helps to complete the job in an easy and hassle free manner. You should hold the wire at a certain angle and press the handles of the stripper together.
Move the Stripper Blades:
Rock the stripper blades in the back and forth direction to cut the insulation on the wire. Once the task is completed, it is possible to pull of the wire in one swift move. Sometimes, people have to buy diagonal cutters for cutting the wires to a well-defined gauge. Presence of angled head helps to slice down right through the surface. They incorporate scissor looking handles to enhance the user interface. Diagonal cutters play an important role to make a well-defined cut into the wire.
Usage of End Nippers:
End nippers are essential as they are equipped with long handles to facilitate easy user interface. Broad head ensures a huge cutting surface for the users. Nippers are moved backward and forward to initiate a cutting process that goes a long way in delivering sterling results to the users.
In addition, jaws of the cutters helps to pull the rope and get hold on the cable in a way that the end points are not extended. Proper connectors working with the rope should not be tied down to facilitate the wiring process.
Usage of Cable Stripper:
Every cable can be stripped in an error free manner by identifying the wire gauge. One can find the same on the outermost sheathing binding the multiple wires together. Generally, the numbers are provided in the fraction format while others are ignored. Common wiring gauges are limited to 14 and 12 units as they are used for high drawing appliances such as dryers and air conditioners.
Matching the gauge on the strip is necessary to find the suitable hole for the device. Once the hole is marked, ascertain whether it is of required size. A big hole creates problems for the coating leading to the severing of the wire inside out.
One should also open the wire stripper handles to place the wire into one side of the hole. It is vital to press the handles together and twist the cable; however, the second step is optional for the users.
Bottom Region:
Holes are of smaller size than the diameter of the plastic coating material. Cutting edge located in the inner part of the holes, slice away the coating. Holes accommodate numerous types of wire gauges; therefore strippers can be used for varying thickness. A wire cutter is also included into the stripper that helps to make the required incision into the wire. You should move the stripper towards the cute end of the wire and discard the casing as it is not used in the process.
Strippers are simple and easy to handle; therefore, people do not have to be technically knowledgeable to accomplish the task.
Comments