The modern garages are provided with automatic garage door opener that is operated by remote control or by the switches placed on the walls of the garage. But it is not easy to install this garage door opening system, unless the basic tactics are known well. Thus, every garage owner should have sufficient knowledge about the garage door opener installation, which can be done in a few simple steps only. So, they can save the expense of hiring any professional for installing this technological door opener, if the work can be done by the garage owners only.
Tasks to be done for Completing Garage Door Opener Installation
First, the garage door should be checked to find whether the latest design of door opener will fit there, as outdated single door panels are not very suitable for these automatic door openers. So, the garage owner needs to change the old door panel and fit the modern type of several horizontal panels on the garage door.
Moreover, the garage door should be in smooth functional condition, with soundly operating hinges and rollers attached on the door, so that the door can be opened or closed faster and without making any noise. So, these hinges should be lubricated and the broken rollers may be changed to bring the desired effects. The release cord of the door should be checked as well, to make sure that the door is in balanced state.
As there are different types of door openers available in the market, the garage owner needs to choose the one that will suit his garage door the best and also will be convenient for him to operate when needed. Usually, the automatic door openers are either belt driven or chain driven, among which the most suitable one needs to be chosen before buying it.
The instructions written in the manual provided with the purchased opener should be strictly followed for the successful garage door opener installation. The previous door lock or opener should be taken out from the door, before the new installation is done.
It is better to have a good look at all the parts of the door opener, by matching them with the pictures given in the instruction sheet, to make the installation process faster and error free.
The garage door should be kept totally open while installing the automatic door opener on it. It is better to use a long ladder, which is needed for installing few parts of the opener at the upper side of the door.
As per the given instructions in the manual, all the pieces of the door opener are properly attached together, along with the installed rail that is required for opening the door freely. Then the iron belt or chain is screwed to the carriage of the door opener, while the other end needs to be winded around the pulley that pulls the garage door open.
The door opener should be attached to the ceiling of the garage, by installing a wooden blocking piece of any suitable size and following the given instructions in the manual.
All the parts are carefully attached to the required spaces, for the perfect garage door opener installation that will ensure easy opening and closing of the door. Proper care should be taken for screwing all the parts to the right places, for the best operation of this door opener at all time, so that no extra force is required to maintain this automatic opener.
Comentários