Automatic gates are those gates that are operated electrically and so the gate can be opened with the mere push of a button. You may automate any kind of gate whether it being a sliding gate, swing gate or lifting gate. If the existing gate is manual and not automatic, you can take necessary steps to automate it. To automate the gate, the gate should be in the best condition or else it is better to replace the gate with an automated gate. Premade automatic gate is also available which is pretty easy to install. The gate must be installed properly and only then the mechanism will work. Know this thing that adding up automated equipment will not be overcoming issues when the gate is incorrectly fixed.
You may be wondering about the mechanism of automated gate. There is a receiver which is fitted into the gate and that receives a signal from the transmitter. You need to use the keypad of the handheld remote control to operate the gate. It is the communication between the transmitter and the receiver which triggers the automatic gate to function. The electric motor gets triggered by the signal and enables the gate to work.
When installing an automated sliding gate, you need to follow the instructions properly. You also need to be cautious of doing so. There are certain things to avoid when installation of the gate is done.
More Safety with Sliding Automated Gates
Nothing can speak luxury better than the installation of wrought iron automated gate which opens into the home. Among all kinds of automated gates, the sliding and swinging gates are most popular. If you wish for an added level of security, do consider the installation of automatic sliding gates. The gate can be used right at the entrance. You and your loved ones will be better protected in case you use automated sliding gate. Sliding gates are much difficult to maneuver when compared to usual gates. Gates functioned by keypad entry or intercom system can be maneuvered but when it comes to sliding gate, it is difficult to maneuver. Hence, it can hence deter the burglars and the outsiders.
Most of the gates installed in today’s time bear some kind of safety feature. Sliding gates have safety features to prevent injuries to the users. You may use safety sensors towards the edge of the sliding doors in order to prevent injuries to your kids and pets.
The Installation Is Easy
Installing sliding gate is easier than the swinging version. While installing the sliding gate, the work person needs not be concerned about the available space and grade of the area. Sliding door can be installed anywhere you want to install. The sliding door may use tracks that are built into the cantilever system or ground to allow proper functioning of gates. Installing cantilever system is far more complex than installing track system.
Things to Check Prior Automatic Gate Installation
You need to follow some guidelines when installing automatic gates:
Do not install automatic gates on slopes for that it can cause problems. Avoid fitting gates on the slopes running upwards or uphill.
The gate opener should be as per the guidelines set by the manufacturer. The gate must follow each and every guideline by the manufacturer
For the underground motor, there must be proper drainage available. The motors are actually meant to be fitted underground.
Make sure you choose only a professional for the gate installation.
Consider the environment, climate prior to installing automatic gates
You have to consider several factors when installing automatic gates. You may also opt for extra locks on the gates for added security.
Comments