The biggest causes of injuries and fatal incidents in construction industry majorly occur due to working at heights. Many workers suffer serious injuries and loss of life is also reported. But such accidents can be avoided if the workers take proper precaution while working at risky environment. Due to the high risks involved it is of prime importance that one need to know the need of safety and this has to be guaranteed by the employers. The first and foremost step is to ensure proper that workers wear appropriate protective equipment. The best of all is the full body safety harness is one such equipment that is majorly used in construction industry because of its multiple benefits.
Why use Safety Harness?
The safety harness is basically a very crucial component for workers working at heights. This actually helps them to remain suspended upright in case there is a fall. It will also support them when they have to await rescue. This is highly recommended for workers in fall restraint systems. The falls at times may be portable. If you wear full body harness then the advantage is that the forces are distributed throughout the body. This therefore minimizes the chances of any significant injury.
Steps of Proper Use of the Harness
One should hold the harness by the back D- ring. Then shale it so that all the straps fall in proper place.
The safety harness has to be worn accurately. Like the workers have to release the straps if the leg or the chest or the waist are buckled.
Slip the straps over the shoulders. Mow the D- ring should rest at the back and also at the middle.
The leg strap needs to be pulled between the legs and then they have to be connected to the opposite end.
Connect the chest strap and then position it in the mid chest area. The entire equipment has to be worn to feel comfortable while working.
The workers must take time to tighten all the buckles. The safety harness should fit the worker accurately for full range movement.
Features of Safety Harness
The person must ensure which one is the best harness for them. This can be done by understanding the features. They are as follows:
Padding is one of the main considerations for a safety harness. The manufacturers have introduced padding so that it will remove the discomfort that is caused due to the web straps. It becomes not only comfortable but also adds a layer of protection. It also enhances the ability to harness in event of fall or during post fall suspension.
The safety harness has quick connected buckles that are accessible and adjustable. Adjustments can be made and also give the component protection form loosening. The type of climbing has to be decided beforehand so that the weight of the harness can be judged. The manufacturers have also begun to use seats and padding that are both light weight and removable.
According to the authority, the common cause of the injuries of the workers is falling from height. But if one uses the protection systems like the full body safety harness, then it can be prevented. This is equipment that has a shock absorbing retractable lifeline distributing the force all over. But another important thing to be considered is that it should be purchased from reputed sellers who have good experience in the fall protection industry. The harness should be inspected from time to time for any wear and tear and repaired or replaced when the need be.
Comments